An instrument, machine, appliance, implant, software or other article intended to be used for a medical purpose.

Data Element
Medical Device Category
Description

AMIA recommends a more thorough breakdown of the Medical Devices Data Class. For medical devices, there should be a distinguishment between permanent versus temporary data classes. Temporary devices for example PICC line, indwelling foley and suprapubic catheters, and wound vacs. Medical applications should also be included as they are considered medical digital devices, such as digital therapeutics, standard languages, payor exchanges, what is included and excluded in this category.
Submitted By: Tayler Williams / American Medical Informatics Association (AMIA)
Data Element Information
Data Element Description AMIA recommends a more thorough breakdown of the Medical Devices Data Class. For medical devices, there should be a distinguishment between permanent versus temporary data classes. Temporary devices for example PICC line, indwelling foley and suprapubic catheters, and wound vacs. Medical applications should also be included as they are considered medical digital devices, such as digital therapeutics, standard languages, payor exchanges, what is included and excluded in this category.
Use Case Description(s)
Use Case Description For medical devices, there should be a distinguishment between permanent versus temporary data classes Temporary devices for example PICC line, indwelling foley and suprapubic catheters, and wound vacs. Medical applications should also be included as they are considered medical digital devices, such as digital therapeutics, standard languages, payor exchanges, what is included and excluded in this category. There are many examples of permanent and temporary medical devices and would allow for a more comprehensive Data Class and standard to promote interoperability.
Estimate the breadth of applicability of the use case(s) for this data element All health systems use medical devices and by adding permanent and temporary data classes would assist the Data Class in understanding the evolution of the industry.
ONC Priority
  • Address public health interoperability needs of reporting, investigation, and emergency response
Maturity of Use and Technical Specifications for Data Element
Applicable Standard(s) FDA Unique Device Identification (UDI) System
Additional Specifications N/A
Current Use Not currently captured, stored, or accessed
Extent of exchange N/A
Potential Challenges
Restrictions on Standardization (e.g. proprietary code) There could be restrictions on the standardization of this data element and class with potential use of proprietary code used by an EHR.
Restrictions on Use (e.g. licensing, user fees) There could be restrictions on the use of this data element and class with potential user fees and associated costs for reporting the use of certain medical devices.
Privacy and Security Concerns Medical devices used by an individual and health care organization contains sensitive information and should be held to a standard of privacy for health care and only securely transferred.
Estimate of Overall Burden There could be a burden of time for health systems that do not currently capture the medical devices used and which are permanent and temporary. The EHR systems could be burdened in developing software to allow the ability to capture this information.
ASTP Evaluation Details
Each submitted Data Element has been evaluated based on the following criteria. The overall Level classification is a composite of the maturity based on these individual criteria. This information can be used to identify areas that require additional work to raise the overall classification level and consideration for inclusion in future versions of USCDI
Criterion #1
Maturity - Current Standards		 Level 0 - Data element is not represented by a terminology standard or SDO-balloted technical specification or implementation guide.
Criterion #2
Maturity - Current Use 		Level 0 - Data element is captured, stored, or accessed in limited settings such as a pilot or proof of concept demonstration.
Criterion #3
Maturity - Current Exchange		 Level 0 - Data element is electronically exchanged in limited environments, such as connectathons or pilots.
Criterion #4
Use Case(s) - Breadth of Applicability		 Level 0 - Use cases apply to a limited number of care settings or specialties, or data element represents a specialization of other, more general data elements.
Evaluation Comment This data element is a component of a more general data element concept of Device Used.

Comment

Submitted by Riki Merrick on

SHIELD Community Proposal for Updates in V7

  1. SHIELD requests that ASTP identify / clarify which assigning authorities' format is expected or if any of the FDA approved formats (https://www.fda.gov/media/96648/download?attachment) are allowed; Providing this information will increase clarity and reduce burden on implementers.
  2. For tracking devices in the laboratory domain SHIELD proposes a phased approach: To focus first on capturing and exchanging the device identifier (DI) before incorporating the production identifiers (PI) (which could be lot number (more important for supply elements and reagents and test kits) / expiration date (does not apply to instruments) / serial number (more applicable for instruments)). The reasoning behind this is that capturing the PIs is not currenlty widely implemented and also not easily scalable in the lab domain, while capturing the DI is supported by some of the existing systems already.
  3. SHIELD encourages the implementation of the IHE Laboratory Analytical Workflow (LAW) profile, which supports the exchange of UDI elements like the DI and PI between instruments and the Lab information system, which is at the beginning of the lab data journey.

Log in or register to post comments

FormGuide

Help

1. Optional: Background Text / Cover Letter

The "Optional Background Text / Cover Letter" field provides space for additional context or introductory information related to your comment.

If you wish to provide context, explanation, or an introduction to your comment, enter this information in the field labeled "Optional Background Text / Cover Letter." This is entirely optional and is most useful when submitting multiple related comments or when additional background would help reviewers understand your feedback.

If you are only commenting on a single data class or element, you may leave this field blank.

2. Select the Data Class

To specify which data class your comment addresses:

  1. In the "Data Class" drop-down menu, select the appropriate data class you want to comment on.
  2. If you are providing a general comment that is not specific to a data element, select "General" from the options. Comments with this designation will be displayed on the USCDI landing page.
  3. Note that the Data Class field will automatically populate based on your current location in the platform:
    1. If you are on a data class page, the field will be set to that specific data class
    2. If you are on a data element page, the corresponding data class will be pre-selected
       

3. Select the Data Element

To specify which data element your comment addresses:

  1. In the "Data Element" drop-down menu, select the specific data element you want to comment on.
  2. The drop-down menu will display only the elements available under the data class you selected in the previous step.
  3. You can use the search function within the drop-down to quickly locate a specific data element.
  4. If you are commenting on the data class itself rather than a specific element, you may leave this field blank.

Note: Comments on a specific data element will appear on the respective data element page, while comments on a data class (without a specific element selected) will appear on the landing page for that data class.
 

Data Class and Data Element

Fig 1 The "Data Class" and "Data Element" dropdown menus allow users to specify the exact content they wish to comment on.

4. Optional: Propose New Data Class or Element

If you cannot find the appropriate data class or element for your comment:

  1. Instead of clicking the "Comment On An Existing Data Class Or Element" button, click the adjacent button labeled "Propose a New Data Class or Data Element."
  2. This will redirect you to the ONDEC (ONC New Data Element and Class) Submission System.
  3. In the ONDEC system, follow the provided instructions to submit your proposal for a new data class or element.
  4. Once your proposal is submitted through ONDEC, it will be reviewed separately from the commenting process.
Propose New Data Class or Element

Fig 2 The "Propose a New Data Class or Data Element" button redirects users to the ONDEC Submission System for proposing new data elements not currently available in the system.

5. Complete the Comment Form

Fill out the required fields in the comment form:

Subject: Enter a brief, descriptive title that summarizes your comment. This helps reviewers quickly understand the nature of your feedback.

Comment: In this field, provide the full details of your comment or feedback. Be as clear and specific as possible about your suggestions, concerns, or observations. Include any relevant details that support your position.

6. Optional: Add Additional Comments

If you need to comment on multiple data classes or elements:

  1. After completing your first comment, click the link labeled "Comment on another data element" at the bottom of the form.
  2. A new comment section will appear, allowing you to enter details for your additional comment.
  3. For each additional comment, you must select the appropriate data class and data element from the drop-down menus.
  4. Complete the Subject and Comment fields for your additional comment.
  5. Repeat this process for each additional comment you wish to submit.

Fig 3 The "Comment on another data element" link enables users to create multiple comments addressing different elements within a single submission.

7. Optional: Upload Supporting Files

The platform allows you to upload supporting documentation to enhance your comment:

  • Locate the "File Upload" section at the bottom of the comment form.
  • Click to upload any files (such as PDFs or documents) that provide additional context, evidence, or clarification for your comment.

Important: If you have already entered your comments using the form fields, there is no need to upload duplicate content in PDF format. The file upload feature is intended for supplementary materials only. Please avoid uploading files that contain the same information already provided in your comment text.

Upload Supporting Files

Fig 4 The "File Upload" section permits users to attach supporting documentation that supplements their written comments.

8. Optional: Save and Exit

If you need to pause your work and return to complete your comment later:

  1. Click the "Save and Exit" button at the bottom of the form.
  2. Your comment will be saved as a draft that you can access and complete later.
  3. When you return to the platform, you will see a red triangle with an exclamation mark next to the “Return to saved Comment” button, indicating that you have saved comments in draft status.
  4. Click this button to continue working on your draft.
  5. You will be taken to a review page where you can:
    1. Select "Submit Comment" to officially submit your feedback.
    2. Click "Edit" to return to the comment form and make changes
    3. Select "Discard Draft" to delete the saved draft and start fresh

Fig 5 A red triangle with exclamation mark indicator appears next to the “Return to saved Comment” button when draft comments are saved in the system.

9. Review and Submit

Once you have completed your comment:

  1. Click the "Review and Submit" button at the bottom of the form.
  2. This will take you to a review screen displaying your comment(s) in full.
  3. Review all information for accuracy and completeness.
  4. On this review screen, you have three options: 
    1. Click "Submit Comment" to officially submit your feedback
    2. Click "Edit" to return to the comment form and make changes
    3. Click "Discard Draft" to delete the comment and start fresh
  5. The review screen also includes a "Print" button that allows you to create a printed copy of your comments for your records. 
  6. If you choose to submit, your comment will be recorded in the system and made available for review by the appropriate stakeholders.
Review and Submit

Fig 6 The review screen allows users to verify comment content and make any necessary modifications before final submission.

USCDI Comments

Close

Add a New Comment

Review comment and Submit

Edit
Comment #1