Push Communication of Vital Signs from Medical Devices

Type	Standard / Implementation Specification	Standards Process Maturity	Implementation Maturity	Federally required	Cost	Test Tool Availability
Standard	IEEE 11073-10101-2004 - Health informatics -- Point-of-care medical device communication -- Part 10101: Nomenclature	Final	Production	No	$	Yes^$
Implementation Specification	IHE-PCD (Patient Care Device Profiles)	Final	Production	No	Free	Yes Yes
Implementation Specification	ITU H.810, H.811, H.812, H.812.5 and H.813	Final	Production	No	Free	Yes

Limitations, Dependencies, and Preconditions for Consideration	Applicable Security Patterns for Consideration
ISO/IEEE 11073 is a family of standards for various medical devices. The IEEE1073 Nomenclature is recognized in the IHE/HL7 record set The ITU implementation specifications are Continua Design Guidelines, developed to provide a suite of open industry standards and specifications that provide several means to end-to-end interoperability between personal medical devices and health information systems. Unrestricted access to the implementation specification: http://www.pchalliance.org/continua-design-guidelines	Feedback requested.

Limitations, Dependencies, and Preconditions for Consideration

Applicable Security Patterns for Consideration

ISO/IEEE 11073 is a family of standards for various medical devices.
The IEEE1073 Nomenclature is recognized in the IHE/HL7 record set
The ITU implementation specifications are Continua Design Guidelines, developed to provide a suite of open industry standards and specifications that provide several means to end-to-end interoperability between personal medical devices and health information systems. Unrestricted access to the implementation specification: http://www.pchalliance.org/continua-design-guidelines

Feedback requested.

Comment

Submitted by mkirwan@pchall… on 2017-11-20

Section III-A Push Communication of Vital Signs from Medical Dev

Comments:

1.For the 3rd Row (ITU H.810…), please change:

•Standards Process Maturity to Final.

•Implementation maturity to Production.

•Adoption Level to 3 dots.

•Test Tool Availability should be ‘Yes’

•Add ‘H.812.5’ after ‘H.812’ within the series of standards to the ‘Standard Implementation/Specification

All should be equivalent to the first row (for ISO/IEEE 11073) as the 11073 the base protocols of the ITU and Continua Design Guidelines (where the test tool exists and is freely available).

2.There is no mention of IEEE 11073 Nomenclature. This nomenclature is recognized within the IHE/HL7 record-set. Please add a new row for this.

***Please note that several of the comments above were submitted last year but not implemented.***